Olimex A33 OlinuXino #################### This tutorial will show the details of Olimex A33-OLinuXino board mainline support and other details like hardware, documentation, schematics are available at `hardware `_ and linux-sunxi Hardware Access *************** Power supply: External 5V Jack USB OTG Cable, USB to TTL for debug BSP Build ********* Image building need host to ready with all necessary tools ready, refer here U-Boot ====== :: git clone git://git.denx.de/u-boot.git cd u-boot make A33-OLinuXino_defconfig && make Linux ===== :: git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git cd linux-next make mrproper ARCH=arm sunxi_defconfig ARCH=arm make -j 4 zImage dtbs Booting ******* SD Boot ======= Write Boot image :: dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=8k seek=1 Now insert the card into A33-OlinuXino board, power on.