Tinker RK3288¶
This tutorial will show the details of Tinker board mainline support and other needed details, for more information about hardware
BSP Build¶
Manual Build¶
Image building need host to ready with all necessary tools ready, refer here
Below are the details of Image build for Tinker RK3288 board. Manual Build
U-Boot¶
$ git clone git://git.denx.de/u-boot.git
$ cd u-boot
$ make tinker-rk3288_defconfig
$ make
Linux¶
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ cd linux-next
$ make mrproper
$ ARCH=arm make multi_v7_defconfig
$ ARCH=arm make -j 4 LOADADDR=0x02000000 uImage dtbs
$ ARCH=arm make modules -j 4
$ ARCH=arm make modules_install -j 4
Buildroot¶
It’s easy to build entire system using buildroot and mainline supported Tinker board already. See read this readme.txt for more info.
$ git clone git://git.busybox.net/buildroot
$ cd buildroot
$ make asus_tinker_rk3288_defconfig && make
SD Boot¶
Create Single partition and Insert the SD on host
$ git clone https://github.com/openedev/rfs-rk3288
$ cp rfs-rk3288/* /media/jagan/rootfs
$ cd /path/to/u-boot
$ ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out
$ cat ./spl/u-boot-spl-dtb.bin >> out
$ dd if=out of=/dev/mmcblk0 seek=64
$ dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384
$ cp /path/to/linux-next/arch/arm/boot/uImage /media/jagan/rootfs/boot
$ cp /path/to/linux-next/arch/arm/boot/dts/rk3288-tinker.dtb /media/jagan/rootfs/boot
$ sync && $ umount /dev/mmcblk0
Falcon Boot¶
Build U-Boot, Linux manually from above steps, and create falcon mode partition from, here
Once the partitioning done, copy all images like SD Boot. Configure falcon
U-Boot TPL 2017.11-rc4-00029-gb142d38-dirty (Nov 10 2017 - 17:04:00)
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2018.03-rc2-00018-g339b842-dirty (Feb 18 2018 - 19:57:13 +0530)
Trying to boot from MMC1
Expected Linux image is not found. Trying to start U-boot
U-Boot 2018.03-rc2-00018-g339b842-dirty (Feb 18 2018 - 19:57:13 +0530)
Model: Tinker-RK3288
DRAM: 2 GiB
MMC: dwmmc@ff0c0000: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
Failed (-5)
In: serial
Out: serial
Err: serial
Model: Tinker-RK3288
Net: failed to enable clock 0
No ethernet found.
Hit any key to stop autoboot: 0