Vyasa RK3288¶

This tutorial will show the details of Vyasa RK3288 Linux BSP Guide. Most of the software supported by Vyasa is mainlined already. You can check hardware details here

Hardware Access¶

Serial: NULL Modem cable, Serial-to-USB converter

Power: DC-in 12V ~ 24V socket supply

Sometimes junk characters show on serial console so better to plug-in USB OTG cable

Prebuilt Image¶

Insert the SD card on to host and write the image.

$ git clone https://github.com/openedev/rootfs-rk32
$ cd rootfs-rk32/boot
$ xzcat sdcard-vyasa.img.xz | dd of=/dev/mmcblk0
$ sync
$ umount /dev/mmcblk0*

Turn-on the board

BSP Building¶

Manual Build¶

Image building need host to ready with all necessary tools ready, refer here

U-Boot¶

$ git clone git://git.denx.de/u-boot.git
$ cd u-boot
$ make vyasa-rk3288_defconfig
$ make

Linux¶

$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
$ cd linux-next
$ make mrproper
$ ARCH=arm make multi_v7_defconfig
$ ARCH=arm make menuconfig
[select CONFIG_DWMAC_ROCKCHIP=m]
$ ARCH=arm make -j 4 LOADADDR=0x02000000 uImage dtbs
$ ARCH=arm make modules -j 4

#modules would installed in lib/ directory of kernel source
$ ARCH=arm make modules_install -j 4 INSTALL_MOD_PATH=./

#for linux-next kernel repo
$ find . -name *`cat localversion-next`

Rootfs¶

Buildroot¶

It’s easy to build entire system using buildroot and mainline supported Vyasa board already. See read this readme.txt for more info.

$ git clone git://git.busybox.net/buildroot
$ cd buildroot
$ make amarula_vyasa_rk3288_defconfig && make

Prepare your SDCard:

Buildroot generates a ready-to-use SD card image that you can flash directly to the card. The image will be in output/images/sdcard.img. You can write this image directly to an SD card device (i.e. /dev/xxx)

$ sudo dd if=output/images/sdcard.img of=/dev/xxx
$ sudo sync

Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.

Ubuntu 16.04¶

U-Boot/Linux¶

Build U-Boot. Linux from BSP Build and Build Mali

Ubuntu RFS ubuntu-xenial

$ cd /path/to
$ wget http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04-core-armhf.tar.gz
$ mkdir /path/to/ubuntu
$ cd ubuntu
$ tar xvf ../ubuntu-base-16.04-core-armhf.tar.gz

copy qemu

$ apt-get install qemu-user-static
$ cp /usr/bin/qemu-arm-static usr/bin/

copy host’s dns

$ cp -b /etc/resolv.conf  etc/resolv.conf

add the following repository to etc/apt/sources.list(for compiling xserver)

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://ports.ubuntu.com/ubuntu-ports/ xenial main  restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://ports.ubuntu.com/ubuntu-ports/ xenial-updates main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-updates main restricted

## Uncomment the following two lines to add software from the 'universe'
## repository.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://ports.ubuntu.com/ubuntu-ports/ xenial universe
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial universe
deb http://ports.ubuntu.com/ubuntu-ports/ xenial-updates universe
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-updates universe

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://ports.ubuntu.com/ubuntu-ports/ xenial-backports main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-backports main restricted

deb http://ports.ubuntu.com/ubuntu-ports/ xenial-security main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-security main restricted
#deb http://ports.ubuntu.com/ubuntu-ports/ xenial-security universe
#deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-security universe
#deb http://ports.ubuntu.com/ubuntu-ports/ xenial-security multiverse
#deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-security multiverse

deb http://ports.ubuntu.com/ubuntu-ports/ xenial-proposed main restricted
deb-src http://ports.ubuntu.com/ubuntu-ports/ xenial-proposed main restricted

chroot to RFS

Download ch-mount.sh

$ cd ../
$ ch-mount.sh -m ubuntu/

Install desktop

$ apt-get update
$ apt-get install lightdm vim git
$ apt-get build-dep xserver-xorg-core

Build xserver

$ cd /opt
$ git clone git://anongit.freedesktop.org/xorg/lib/libXfont
$ cd libXfont
$ ./autogen.sh --prefix=/usr
$ make check
$ make && make install
$ cd ..
$ apt install libxcb-xkb-dev
$ git clone https://github.com/rockchip-linux/xserver.git
$ cd xserver
[ delete these line on configure.ac ]
AC_CHECK_DECL(GBM_BO_USE_LINEAR,
                        [AC_DEFINE(GLAMOR_HAS_GBM_LINEAR, 1, [Have GBM_BO_USE_LINEAR])], []
$ ./autogen.sh --prefix=/usr --enable-aiglx --enable-composite --enable-record --enable-xv --enable-xvmc \
--enable-dga --enable-screensaver \--enable-xdmcp --enable-xdm-auth-1 --enable-glx --enable-dri --enable-dri2 \
 --enable-glamor --enable-dri3 --enable-libdrm --enable-present --enable-xinerama --enable-xf86vidmode \
--enable-xace --enable-xselinux --enable-xfree86-utils --enable-systemd-logind --with-systemd-daemon \
--enable-suid-wrapper --enable-dmx --enable-xvfb --enable-xnest --enable-kdrive --enable-xephyr --enable-xmir \
--with-sha1=libgcrypt --enable-xcsecurity --with-log-dir=/var/log
$ make && make install

set password

$ useradd -s '/bin/bash' -m -G adm,sudo rk
$ echo "Set password for rk:"
$ passwd rk
$ echo "Set password for root:"
$ passwd root

exit chroot

$ exit
$ ch-mount.sh -u ubuntu/

libmali

Copy libmali here to ubuntu/opt

Prepare SD Create Single partition and Insert the SD on host.

$ cp ubuntu/* /media/jagan/rootfs
$ cp path/to/arch/arm/boot/uImage /media/jagan/rootfs/boot
$ cp /path/to/rockchip_forwardports/midgard_r13p0/mali_kbase.ko /media/jagan/root
$ cp path/to/arch/arm/boot/dts/rk3288-vyasa.dtb /media/jagan/rootfs/boot
$ mkdir /media/jagan/rootfs/boot/extlinux/
$ vi /media/jagan/rootfs/boot/extlinux/extlinux.conf
label Vyasa linux-next
  kernel /boot/uImage
  devicetree /boot/rk3288-vyasa.dtb
  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
$ cd /path/to/u-boot
$ ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out
$ cat ./spl/u-boot-spl-dtb.bin >> out
$ dd if=out of=/dev/mmcblk0 seek=64
$ dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384
$ sync && sudo umount /media/jagan/rootfs

Boot Ubuntu¶

Insert the SD card put SD Bootmode and power-on the board

We need insert mali drivers and libs

root@localhost:/opt/libmali# cat /sys/devices/platform/*gpu/gpuinfo
Mali-T76x MP4 r0p0 0x0750
root@localhost:/opt/libmali# mount -n -oremount,rw /
root@lalhost:/opt/libmali# dpkg -i libmali-rk-midgard-t76x-r14p0-r0p0_1.5-6_arm
Selecting previously unselected package libmali-rk-midgard-t76x-r14p0-r0p0:armhf.
(Reading database ... 62913 files and directories currently installed.)
Preparing to unpack libmali-rk-midgard-t76x-r14p0-r0p0_1.5-6_armhf.deb ...
Unpacking libmali-rk-midgard-t76x-r14p0-r0p0:armhf (1.5-6) ...
Replacing files in old package libgbm1:armhf (17.2.4-0ubuntu1~16.04.2) ...
Setting up libmali-rk-midgard-t76x-r14p0-r0p0:armhf (1.5-6) ...
root@localhost:/opt/libmali# dpkg -i libmali-rk-dev_1.5-6_armhf.deb
Selecting previously unselected package libmali-rk-dev:armhf.
(Reading database ... 62927 files and directories currently installed.)
Preparing to unpack libmali-rk-dev_1.5-6_armhf.deb ...
Unpacking libmali-rk-dev:armhf (1.5-6) ...
Replacing files in old package libegl1-mesa-dev:armhf (17.2.4-0ubuntu1~16.04.2) ...
Replacing files in old package libgbm-dev:armhf (17.2.4-0ubuntu1~16.04.2) ...
Setting up libmali-rk-dev:armhf (1.5-6) ...
root@localhost:~# modprobe -a governor_simpleondemand
root@localhost:~# insmod /root/mali_kbase.ko

Switch to Graphical mode

root@localhost:~# systemctl start graphical.target

Booting¶

SDMMC Boot¶

Write SD¶

Create Single partition and Insert the SD on host.

$ git clone https://github.com/openedev/rootfs-rk32
$ cp rootfs-rk32/* /media/jagan/rootfs/
$ cp arch/arm/boot/uImage /media/jagan/rootfs/boot
$ cp arch/arm/boot/dts/rk3288-vyasa.dtb /media/jagan/rootfs/boot
$ cd /path/to/u-boot
$ ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out
$ cat ./spl/u-boot-spl-dtb.bin >> out
$ dd if=out of=/dev/mmcblk0 seek=64
$ dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384
$ sync && sudo umount /media/jagan/rootfs

Turn-on Board * Plug the SD card to Vyasa, * Open minicom with detected /dev/ttyUSBX device (where X is detected device number) * Baudrate 115200n8 * close JP4 for SD boot * Plug-in USB OTG cable * Turn-on the power supply

eMMC Boot¶

U-Boot Accessing Peripherals SDMMC

=> mmc list
dwmmc@ff0c0000: 1 (SD)
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
=> mmcinfo
Device: dwmmc@ff0c0000
Manufacturer ID: 12
OEM: 3456
Name: MS
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 3.7 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
=> ext4ls  mmc 1:1
<DIR>       4096 .
<DIR>       4096 ..
<DIR>      16384 lost+found
<DIR>       4096 proc
<DIR>       4096 etc
<DIR>       4096 lib
<DIR>       4096 media
<DIR>       4096 tmp
<DIR>       4096 dev
<SYM>          3 lib32
<DIR>       4096 var
<DIR>       4096 usr
<DIR>       4096 run
<DIR>       4096 sbin
<DIR>       4096 root
<DIR>       4096 bin
<DIR>       4096 opt
<DIR>       4096 mnt
<DIR>       4096 boot
<SYM>         11 linuxrc
<DIR>       4096 sys
=> ext4load mmc 1:1 $kernel_addr_r /boot/uImage
7975488 bytes read in 374 ms (20.3 MiB/s)
=> iminfo $kernel_addr_r

## Checking Image at 02000000 ...
   Legacy image found
   Image Name:   Linux-4.14.0
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7975424 Bytes = 7.6 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Verifying Checksum ... OK

eMMC GMAC Setup host tftp server from here once U-Boot booted from SD

=> setenv serverip 10.39.66.9
=> setenv ipaddr 10.39.66.10
=> ping 10.39.66.9
Speed: 100, full duplex
Using ethernet@ff290000 device
host 10.39.66.9 is alive
=> tftpboot $kernel_addr_r uImage
Speed: 100, full duplex
Using ethernet@ff290000 device
TFTP from server 10.39.66.9; our IP address is 10.39.66.10
Filename 'uImage'.
Load address: 0x2000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #######################################
         3.8 MiB/s
done
Bytes transferred = 8184392 (7ce248 hex)
=> tftpboot $fdt_addr_r rk3288-vyasa.dtb
Speed: 100, full duplex
Using ethernet@ff290000 device
TFTP from server 10.39.66.9; our IP address is 10.39.66.10
Filename 'rk3288-vyasa.dtb'.
Load address: 0x1f00000
Loading: ########
         1.8 MiB/s
done
Bytes transferred = 38215 (9547 hex)
=> setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait'
=> bootm ${kernel_addr_r} - ${fdt_addr_r}
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-4.14.0-rc4-next-20171013-0
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    8184328 Bytes = 7.8 MiB
   Load Address: 02000000
   Entry Point:  02000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Kernel Image ... OK
   Loading Device Tree to 0fff3000, end 0ffff546 ... OK

Starting kernel ...

USB HDMI Linux Accessing Peripherals SDMMC

Welcome to VYASA RK3288!
vyasa-rk3288 login: root
# dmesg | grep mmcblk0
[    0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
[    2.472712] Waiting for root device /dev/mmcblk0p1...
[    2.530084] mmcblk0: mmc0:59b4 MS    3.67 GiB
[    2.535640]  mmcblk0: p1
[    2.564302] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    2.574054] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    2.592747] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    2.857154] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
# fdisk -l
Disk /dev/mmcblk0: 3763 MB, 3945791488 bytes, 7706624 sectors
22666 cylinders, 85 heads, 4 sectors/track
Units: cylinders of 340 * 512 = 174080 bytes

Device       Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/mmcblk0p1    1,15,1      66,84,4          17010    1065585    1048576  512M 83 Linux
# mount /dev/mmcblk0p1 /mnt/
# ls /mnt/
bin         lib         media       root        tmp
boot        lib32       mnt         run         usr
dev         linuxrc     opt         sbin        var
etc         lost+found  proc        sys
# umount  /mnt/

eMMC GMAC Wifi/BT USB Vyasa has two host port connectors and below shows the details of accessing devices on these ports

High Speed device

# [  446.332807] usb 3-1.3: new high-speed USB device number 4 using ehci-platform
[  446.493489] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[  446.502271] scsi host0: usb-storage 3-1.3:1.0
[  447.515719] scsi 0:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 4
[  447.528895] sd 0:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[  447.538389] sd 0:0:0:0: [sda] Write Protect is off
[  447.544764] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  447.560649]  sda: sda1
[  447.566779] sd 0:0:0:0: [sda] Attached SCSI removable disk
# fdisk -l /dev/sda1
Disk /dev/sda1: 7679 MB, 8052015104 bytes, 15726592 sectors
1022 cylinders, 248 heads, 62 sectors/track
Units: cylinders of 15376 * 512 = 7872512 bytes

Full Speed device - Wireless mouse, testing with left and right click

# [  100.947712] usb 3-1.3: USB disconnect, device number 4
[  109.942893] usb 3-1.3: new full-speed USB device number 5 using ehci-platform
[  110.104052] input: Compx 2.4G Receiver as /devices/platform/ff500000.usb/usb3/3-1/3-1.3/3-1.3:1.0/0003:1D57:FA60.0001/input/input0
[  110.184781] hid-generic 0003:1D57:FA60.0001: input: USB HID v1.00 Keyboard [Compx 2.4G Receiver] on usb-ff500000.usb-1.3/input0
[  110.199732] input: Compx 2.4G Receiver as /devices/platform/ff500000.usb/usb3/3-1/3-1.3/3-1.3:1.1/0003:1D57:FA60.0002/input/input1
[  110.212938] hid-generic 0003:1D57:FA60.0002: input: USB HID v1.00 Mouse [Compx 2.4G Receiver] on usb-ff500000.usb-1.3/input1
[  110.230060] input: Compx 2.4G Receiver as /devices/platform/ff500000.usb/usb3/3-1/3-1.3/3-1.3:1.2/0003:1D57:FA60.0003/input/input2
[  110.312793] hid-generic 0003:1D57:FA60.0003: input: USB HID v1.00 Device [Compx 2.4G Receiver] on usb-ff500000.usb-1.3/input2
# evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0:      Compx 2.4G Receiver
/dev/input/event1:      Compx 2.4G Receiver
/dev/input/event2:      Compx 2.4G Receiver
Select the device event number [0-2]: 1
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x1d57 product 0xfa60 version 0x100
Input device name: "Compx 2.4G Receiver"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 272 (BTN_LEFT)
    Event code 273 (BTN_RIGHT)
    Event code 274 (BTN_MIDDLE)
    Event code 275 (BTN_SIDE)
    Event code 276 (BTN_EXTRA)
  Event type 2 (EV_REL)
    Event code 0 (REL_X)
    Event code 1 (REL_Y)
    Event code 6 (REL_HWHEEL)
    Event code 8 (REL_WHEEL)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Properties:
Testing ... (interrupt to exit)
Event: time 153.949644, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001
Event: time 153.949644, type 1 (EV_KEY), code 272 (BTN_LEFT), value 1
Event: time 153.949644, type 2 (EV_REL), code 0 (REL_X), value 1163
Event: time 153.949644, type 2 (EV_REL), code 1 (REL_Y), value -108
Event: time 153.949644, -------------- SYN_REPORT ------------
Event: time 154.145610, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001
Event: time 154.145610, type 1 (EV_KEY), code 272 (BTN_LEFT), value 0
Event: time 154.145610, -------------- SYN_REPORT ------------
Event: time 164.089632, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002
Event: time 164.089632, type 1 (EV_KEY), code 273 (BTN_RIGHT), value 1
Event: time 164.089632, -------------- SYN_REPORT ------------
Event: time 164.229603, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002
Event: time 164.229603, type 1 (EV_KEY), code 273 (BTN_RIGHT), value 0
Event: time 164.229603, -------------- SYN_REPORT ------------

Thermal Management RK3288 supports three thermal zones for CPU, GPU and reserved. We can control and read these zone temperature and polices through /proc

# cat /sys/class/thermal/
cooling_device0/  thermal_zone0/    thermal_zone1/    thermal_zone2/
# cat /sys/class/thermal/thermal_zone0/type
reserve_thermal
# cat /sys/class/thermal/thermal_zone0/temp
cat: read error: Invalid argument
# cat /sys/class/thermal/thermal_zone1/type
cpu_thermal
# cat /sys/class/thermal/thermal_zone1/temp
47727
# cat /sys/class/thermal/thermal_zone1/policy
step_wise
# cat /sys/class/thermal/thermal_zone2/type
gpu_thermal
# cat /sys/class/thermal/thermal_zone2/temp
45454
# cat /sys/class/thermal/thermal_zone2/policy
step_wise

VGA HDMI Connect HDMI cable between external monitor with vyasa hdmi port

# modprobe -a rockchipdrm
[   29.856111] rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops [rockchipdrm])
[   29.866742] rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops [rockchipdrm])
[   29.877119] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
[   29.888348] rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[   29.898973] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   29.906374] [drm] No driver support for vblank timestamp query.
[   29.950736] Console: switching to colour frame buffer device 128x48
[   30.010803] rockchip-drm display-subsystem: fb0:  frame buffer device
[   30.053757] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
LVDS
eDP
Mali t760
Mali t760 tested well with Qt5 and OpenGL ES, see steps to verify here

VCODEC
vcodec tested well with Gsteamer, see steps to verify here

Audio
Mainline Efforts
See this page for Mainline status and WIP

Jtag debugging needs a jtag-breakout program to be flashed to eMMC while connecting jtag probe through sd-card pins. This can be done by using a sd-card sniffer(i.e. Sparkfun microSD Sniffer). Follow this repository to make it work: https://github.com/giuliobenetti/rk-jtag-breakout

Lauterbach Trace32 script for debugging Linux

; --------------------------------------------------------------------------------
; @Title: RK3288-Vyasa Linux debugging Rockchip RK3288
; @Description:
;   The example is generated for Rockchip RK3288
; @Keywords: linux, Rockchip, rk3288*, RK3288*
; @Author: Giulio Benetti <giulio.benetti@benettiengineering.com>
; @Board: RK3288-Vyasa*
; @Chip: RK3288*
; --------------------------------------------------------------------------------
; $Id: linux.cmm

LOCAL &uboot_path
LOCAL &linux_path
LOCAL &dtb_path
LOCAL &dtbo_path
LOCAL &ka_path
LOCAL &awareness

&uboot_path="/home/user/git/amarula/debian/u-boot"
&linux_path="/home/user/git/amarula/debian/kernel"
&dtb_path="/home/user/git/amarula/debian/kernel/arch/arm/boot/dts"

; Debugger Reset
WinPAGE.RESet
AREA.RESet
WinPOS 0. 25. 75. 9. 0. 0. W000
AREA.view

PRINT "resetting..."

RESet
SYStem.CPU RK3288

SYSTEM.RESETOUT ; hard reset
SYStem.JTAGCLOCK 20MHz

SYStem.Option DACR ON          ; give Debugger global write permissions
TrOnchip.Set DABORT OFF        ; used by Linux for page miss!
TrOnchip.Set PABORT OFF        ; used by Linux for page miss!
TrOnchip.Set UNDEF OFF         ; my be used by Linux for FPU detection
SYStem.Option MMUSPACES OFF    ; disable space to allow loading and running u-boot
SETUP.IMASKASM ON          ; lock interrupts while single stepping
SETUP.IMASKHLL ON          ; lock interrupts while single stepping

SYStem.Up

;load tpl in sram
data.load.binary &uboot_path/tpl/u-boot-tpl.bin 0xff704000
data.load.elf &uboot_path/tpl/u-boot-tpl /nocode
Register.Init
r.s pc 0xff704000

; start and wait for tpl to pass sdram_init
go.direct back_to_bootrom
WAIT !run()
break

;load spl in sdram
data.load.binary &uboot_path/spl/u-boot-spl-dtb.bin 0x0
data.load.elf &uboot_path/spl/u-boot-spl /nocode
Register.Init
r.s pc 0x00000020

; start and wait for spl to hang
go.direct hang
WAIT !run()

data.load.binary &uboot_path/u-boot-dtb.bin 0x00200000
data.load.elf &uboot_path/u-boot /nocode; uncomment this to debug before relocation
;data.load.elf &uboot_path/u-boot 0x14F70000 /nocode /noreg /noclear
Register.Init
r.s pc 0x00200000

go
wait 3s
break

PRINT "loading Linux image..."
; Loading Linux image and DTB via ICD
Data.LOAD.Binary &linux_path/arch/arm/boot/zImage 0x02008000
; Load the Linux kernel symbols into the debugger
PRINT "loading Linux kernel symbols..."
Data.LOAD.Elf &linux_path/vmlinux /gnu /NoCODE
; Load DTB
PRINT "loading DTB..."
Data.LOAD.Binary &dtb_path/rk3288-vyasa.dtb 0x08300000 /NoClear

; Open serial terminal window on ttyUSB0
DO ~~/demo/etc/terminal/serial/term.cmm /dev/ttyUSB0 115200.

; Starting the kernel
Go
PRINT "Starting Linux..."
; Wait for uboot to be ready to receive characters on serial
;wait 3s
; Stop autoboot of U-Boot
TERM.Out 0x03 ; Ctrl-C
WAIT 0.1s
; Set boot arguments
TERM.Out "setenv bootargs console=ttyS2,115200 earlyprintk root=/dev/mmcblk0p1 rootwait rw panic=10" 0x0a
WAIT 0.1s

TERM.Out "bootz 0x02008000 - 0x08300000" 0x0a
WAIT 0.1s
break

Go.direct start_kernel /Onchip
WAIT !run()

; enable MMU option since u-boot has already setup MMU
SYStem.Option MMUSPACES ON

; Map the virtual kernel symbols to physical addresses
; to give the debugger access to it before CPU MMU is
; initialized
PRINT "initializing debugger MMU..."
SYStem.Option MMUSPACES ON
MMU.FORMAT LINUX swapper_pg_dir 0xc0000000--0xffffffff 0x00000000
TRANSlation.COMMON 0xc0000000--0xffffffff     ; common area for kernel and processes
TRANSlation.TableWalk ON   ; debugger uses a table walk to decode virtual addresses
TRANSlation.ON

; Initialize Linux Awareness
&ka_path="~~/demo/arm/kernel/linux/awareness"
&awareness="linux.t32"

PRINT "initializing RTOS support..."
TASK.CONFIG &ka_path/&awareness      ; loads Linux awareness
MENU.ReProgram &ka_path/linux        ; loads Linux menu
; Group kernel area to be displayed with red bar
GROUP.Create "kernel" 0xc0000000--0xffffffff /RED

List.Hll

break.config.method.program Onchip

enddo

Lauterbach Trace32 script for debugging U-Boot

; --------------------------------------------------------------------------------
; @Title: RK3288-Vyasa U-Boot debugging Rockchip RK3288
; @Description:
;   The example is generated for Rockchip RK3288
; @Keywords: uboot, Rockchip, rk3288*, RK3288*
; @Author: Giulio Benetti <giulio.benetti@benettiengineering.com>
; @Board: RK3288-Vyasa*
; @Chip: RK3288*
; --------------------------------------------------------------------------------
; $Id: uboot.cmm

LOCAL &uboot_path

&uboot_path="/home/user/git/amarula/debian/u-boot"

; Debugger Reset
WinPAGE.RESet
AREA.RESet
WinPOS 0. 25. 75. 9. 0. 0. W000
AREA.view

PRINT "resetting..."

RESet
SYStem.CPU RK3288

SYSTEM.RESETOUT ; hard reset
SYStem.JTAGCLOCK 20MHz

SYStem.Up

SETUP.IMASKASM ON          ; lock interrupts while single stepping

;load tpl in sram
data.load.binary &uboot_path/tpl/u-boot-tpl.bin 0xff704000
data.load.elf &uboot_path/tpl/u-boot-tpl /nocode
Register.Init
r.s pc 0xff704000

; start and wait for tpl to pass sdram_init
go.direct back_to_bootrom
WAIT !run()
break

;load spl in sdram
data.load.binary &uboot_path/spl/u-boot-spl-dtb.bin 0x0
data.load.elf &uboot_path/spl/u-boot-spl /nocode
Register.Init
r.s pc 0x00000020

; start and wait for spl to hang
go.direct hang
WAIT !run()

data.load.binary &uboot_path/u-boot-dtb.bin 0x00200000
data.load.elf &uboot_path/u-boot /nocode; uncomment this to debug before relocation
;data.load.elf &uboot_path/u-boot 0x14F70000 /nocode /noreg /noclear
Register.Init
r.s pc 0x00200000

go.direct board_init_f
WAIT !run()

list.auto

enddo